Device Scheduling
From aquarium-doc
Revision as of 12:35, 2 April 2023 by Uwe (talk | contribs) (Created page with "The following components actuate the relays: * Refill Control: refilling of fresh water depending on water level * Feeder Control: stopping flow pumps, skimmer and actuating the feeder * Water Exchange Control: actuating the external pump for water exchange * Balling Control: actuating the pumps for mineral dosing There are two requirements, which ask for a more sophisticated control of the relays: * The dosing of minerals needs to be as precise as possible. * The HW sh...")
The following components actuate the relays:
- Refill Control: refilling of fresh water depending on water level
- Feeder Control: stopping flow pumps, skimmer and actuating the feeder
- Water Exchange Control: actuating the external pump for water exchange
- Balling Control: actuating the pumps for mineral dosing
There are two requirements, which ask for a more sophisticated control of the relays:
- The dosing of minerals needs to be as precise as possible.
- The HW shall be tested before commencing certain operations.
- The communication with the board needs to be reinitialised or reopened after certain periods of time.
